NetApp Refreshes Entry-Level FAS Systems

Today NetApp announced the successors to their entry-level line of FAS storage arrays: the FAS2552, FAS2254 and the FAS2520 which replace the FAS2240-2, FAS2240-4 and FAS2220 respectively.

Why is this important? Until now, in order to run Clustered Data ONTAP, you had to use your one and only expansion option for a 10GbE card for the cluster interconnect network, giving up any chance of deploying Fibre Channel. Technically, since this was a two-port card, you could still provide 10GbE uplink at the expense of redundancy on the ClusterNet backend. However, the new models give up the mezzanine slot altogether in favour of a minimum of 4 ×10GbE on board on the FAS2520 to 4 ×UTA2 ports on both the FAS2552 and FAS2554.

Highlights:

With this refresh NetApp continues to use the same dual-core, hyper-threaded, 1.73GHz Jasper Forest processors as before – which, incidentally, was specifically designed for both embedded and storage applications — but the quantity is doubled to four, not to mention there’s a three-fold increase in memory. All of this added memory increases the ability for Data ONTAP to address more flash, raising the Flash Pool™caching limit to 4TB. Finally, with the addition of onboard 10GbE across the line, NetApp closes the gap in regard to ClusterNet interconnect requirements. The minimum version of ONTAP required for either 7-mode or Cluster-Mode will be the one it ships with, 8.2.2RC1.

FAS2520

The FAS2520A is a 2U appliance supporting 12 SAS, SATA, and NSE drives internally, and up to 72 additional drives externally. Connectivity is provided by 4×6GB SAS ports, 4×1GbE interfaces and 8×10GBASE-T. Unlike its predecessor, there are no expansion slots.

2520

NetApp’s new FAS2520, rear view.

FAS2552/FAS2554

The FAS2552A is a 2U appliance supporting 24 SAS, NSE and SSD drives internally and the FAS2554A is a 4U appliance supporting SATA, NSE and SSD drives internally; both models support up to an additional 120 drives externally. Connectivity is provided by 4×6GB SAS ports, 4x1GbE interfaces and 8×UTA2 ports. The UTA2 ports can be configured as either 8Gb FC, 16Gb FC, or 10GbE. The 10GbE configuration does indeed support FCoE as well as the usual CIFS, NFS and iSCSI options. Due to the fact that each pair of ports is driven by one ASIC, the UTA2 ports must be configured in pairs. However, it should be noted that their personality can be modified in the field; this requires a reboot as well as the requisite SFP.

2552

NetApp’s new FAS2552, rear view.

2554

NetApp’s new FAS2554, rear view.

Port Legend

Summary

With this second round of major updates to the FAS systems this year, the entire line is now truly Clustered Data ONTAP-ready, with every model sporting 10 Gig connectivity on-board. What I find most noteworthy is the amount of RAM that has been added which significantly increases the amount of flash-based cache the devices can address. Flash Pools abound!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.